Tubes, pipes and hollow profiles — HS code 73.04. 7304.11 iron or steel (excluding cast iron)… · 7304.19 iron or steel… 98 tariff lines with duty rates.
Source: Turkish Ministry of Trade — Turkish Customs Tariff Schedule (TGTC), 2026 edition.
Data last updated:
.
Compiled from the official schedule for information only. Binding tariff information is issued by the customs administration.
What this heading covers
Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
The first six digits are the same in every country that applies the Harmonized System; the twelve-digit breakdown below them is specific to Türkiye. This heading has 15 subheadings and 98 twelve-digit codes (2026 schedule).
This heading sits in chapter 73 (Iron or steel articles). Classification is governed by the official chapter notes: a note can pull goods into the chapter or push them out of it.
Supplementary units used by the codes under this heading: Kg.
Subheadings and tariff codes
The code used on a customs declaration has twelve digits. The list below gives the six-digit subheading first, then the twelve-digit codes underneath it. Opening a code shows its definition and the Turkish import duty rows registered against it.
Official English wording exists only down to the six-digit HS subheading. The twelve-digit breakdowns below it are national lines published by Türkiye in Turkish only, so they are shown here in Turkish — translating them ourselves would put words on a customs code that no authority has approved.
7304.10 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
7304.10.10.00.11 — Dış çapı 73 mm. yi geçmeyenler (unit: Kg)
7304.10.10.00.12 — Dış çapı 73 mm. yi geçen, fakat 168,3 mm. yi geçmeyenler (unit: Kg)
7304.10.30.00.11 — Dış çapı 168,3 mm. yi geçen, fakat 219 mm. yi geçmeyenler (unit: Kg)
7304.10.30.00.12 — Dış çapı 219 mm. yi geçen, fakat 406,4 mm. yi geçmeyenler (unit: Kg)
7304.10.90.00.00 — Dış çapı 406,4 mm. yi geçenler (unit: Kg)
7304.21 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
7304.21.00.10.00 — Borular (unit: Kg)
7304.21.00.90.00 — Aksam ve parçalar (unit: Kg)
7304.22 — Steel, stainless; seamless, drill pipe, of a kind used in drilling for oil or gas
7304.22.00.10.00 — Borular
7304.22.00.90.00 — Aksam ve parçalar
7304.23 — Iron or steel (excluding cast iron or stainless steel); seamless, drill pipe, of a kind used in drilling for oil or gas
7304.23.00.10.00 — Borular
7304.23.00.90.00 — Aksam ve parçalar
7304.24 — Steel, stainless; seamless, casing and tubing, of a kind used in drilling for oil or gas
7304.24.00.10.00 — Borular
7304.24.00.90.00 — Aksam ve parçalar
7304.29 — Iron or steel (excluding cast iron or stainless steel); seamless, casing and tubing, of a kind used in drilling for oil or gas
7304.29.10.10.00 — Borular
7304.29.10.90.00 — Aksam ve parçalar
7304.29.11.10.11 — Dış çapı 244,5 mm. yi geçmeyenler (unit: Kg)
7304.29.11.10.12 — Dış çapı 244,5 mm. yi geçen, fakat 406,4 mm. yi geçmeyenler (unit: Kg)
7304.29.11.90.00 — Aksam ve parçalar (unit: Kg)
7304.29.19.10.00 — Borular (unit: Kg)
7304.29.19.90.00 — Aksam ve parçalar (unit: Kg)
7304.29.30.10.11 — Dış çapı 244,5 mm.yi geçmeyenler
7304.29.30.10.12 — Dış çapı 244,5 mm.yi geçen, fakat 406,4 mm.yi geçmeyenler
7304.29.30.90.00 — Aksam ve parçalar
7304.29.90.10.00 — Borular
7304.29.90.90.00 — Aksam ve parçalar
7304.31 — Iron or non-alloy steel (excluding cast iron); seamless, cold-drawn or cold-rolled, tubes, pipes and hollow profiles of circular cross-section
7304.31.10.00.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.31.20.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.31.20.90.00 — Diğerleri
7304.31.80.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.31.80.90.00 — Diğerleri:
7304.31.91.00.00 — Hassas borular (unit: Kg)
7304.31.99.00.00 — Diğerleri (unit: Kg)
7304.39 — Iron or non-alloy steel (excluding cast iron); seamless, (excluding cold-drawn or cold-rolled), tubes, pipes and hollow profiles of circular cross-section
7304.39.10.00.00 — İşlenmemiş, düz ve et kalınlığı her yerinde aynı olan ince ve kalın borular ve diğer profillerin ve değişik et kalınlığındaki boruların imalinde kullanılanlar
7304.39.20.00.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.39.30.00.00 — Dış çapı 421 mm. yi ve et kalınlığı 10,5 mm.yi geçenler (unit: Kg)
7304.39.50.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçası takılmış)
7304.39.50.90.00 — Diğerleri
7304.39.51.00.00 — Çinko kaplı (unit: Kg)
7304.39.59.00.00 — Diğerleri (unit: Kg)
7304.39.82.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçası takılmış)
7304.39.82.90.00 — Diğerleri
7304.39.83.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçası takılmış)
7304.39.83.90.00 — Diğerleri
7304.39.88.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçası takılmış)
7304.39.88.91.00 — Dış çapı 421 mm.yi ve et kalınlığı 10,5 mm.yi geçenler
7304.39.88.99.00 — Diğerleri
7304.39.91.00.11 — Dış çapı 108 mm. yi geçmeyenler (unit: Kg)
7304.39.91.00.12 — Dış çapı 108 mm. yi geçen, fakat 168,3 mm. yi geçmeyenler (unit: Kg)
7304.39.93.00.11 — Dış çapı 168,3 mm. yi geçen, fakat 273 mm. yi geçmeyenler (unit: Kg)
7304.39.93.00.12 — Dış çapı 273 mm. yi geçen, fakat 406,4 mm. yi geçmeyenler (unit: Kg)
7304.39.99.00.00 — Dış çapı 406,4 mm. yi geçenler (unit: Kg)
7304.41 — Steel, stainless; cold-drawn or cold-rolled (cold-reduced), tubes and pipes of circular cross-section
7304.41.00.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.41.00.90.00 — Diğerleri
7304.41.10.00.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.41.90.00.00 — Diğerleri (unit: Kg)
7304.49 — Steel, stainless; (excluding cold-drawn or cold-rolled), tubes pipes and hollow profiles of circular cross-section
7304.49.10.00.00 — İşlenmemiş, düz ve et kalınlığı her yerinde aynı olan ince ve kalın borular ve diğer profillerin ve değişik et kalınlığındaki boruların imalinde kullanılanlar
7304.49.30.00.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.49.83.00.00 — Dış çapı 168,3 mm.yi geçmeyenler
7304.49.85.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.49.85.90.00 — Diğerleri
7304.49.89.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.49.89.90.00 — Diğerleri
7304.49.91.00.00 — Dış çapı 406,4 mm. yi geçmeyenler (unit: Kg)
7304.49.99.00.00 — Dış çapı 406,4 mm. yi geçenler (unit: Kg)
7304.51 — Steel, alloy (not stainless steel); seamless, cold-drawn or cold-rolled (cold-reduced), tubes, pipes and hollow profiles of circular cross-section
7304.51.10.00.00 — Ağırlık itibariyle % 0,9 ila % 1,15 karbon, % 0,5 ila % 2 krom ve en fazla % 0,5 molibden içeren, düz ve et kalınlığı her yerinde aynı olan borular
7304.51.11.00.00 — Uzunlukları 4,5 metreyi geçmeyenler (unit: Kg)
7304.51.19.00.00 — Uzunlukları 4,5 metreyi geçenler (unit: Kg)
7304.51.30.00.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.51.81.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.51.81.90.00 — Diğerleri
7304.51.89.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.51.89.90.00 — Diğerleri
7304.51.91.00.00 — Hassas borular (unit: Kg)
7304.51.99.00.00 — Diğerleri (unit: Kg)
7304.59 — Steel, alloy (not stainless steel); (excluding cold-drawn or cold-rolled), tubes, pipes and hollow profiles of circular cross-section
7304.59.10.00.00 — İşlenmemiş, düz ve et kalınlığı her yerinde aynı olan ince ve kalın borular ve diğer profillerin ve değişik et kalınlığındaki boruların imalinde kullanılanlar
7304.59.30.00.00 — Ağırlık itibariyle % 0,9 ila % 1,15 karbon, % 0,5 ila % 2 krom ve en fazla % 0,5 molibden içeren düz ve et kalınlığı her yerinde aynı olan borular
7304.59.31.00.00 — Uzunlukları 4,5 metreyi geçmeyenler (unit: Kg)
7304.59.39.00.00 — Uzunlukları 4,5 metreyi geçenler (unit: Kg)
7304.59.50.00.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.59.82.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.59.82.90.00 — Diğerleri
7304.59.83.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.59.83.90.00 — Diğerleri
7304.59.89.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.59.89.90.00 — Diğerleri
7304.59.91.00.00 — Dış çapı 168,3 mm. yi geçmeyenler (unit: Kg)
7304.59.93.00.00 — Dış çapı 168,3 mm. yi geçen fakat 406,4 mm. yi geçmeyenler (unit: Kg)
7304.59.99.00.00 — Dış çapı 406,4 mm. yi geçenler (unit: Kg)
7304.90 — Iron or steel (excluding cast iron); seamless, tubes, pipes and hollow profiles, seamless, n.e.c. in heading no. 7304
7304.90.00.10.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.90.00.90.00 — Diğerleri
7304.90.10.00.00 — Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış)
7304.90.90.00.00 — Diğerleri (unit: Kg)
7304.11
7304.11.00.00.00 — Paslanmaz çelikten olanlar
7304.19
7304.19.10.00.11 — Dış çapı 73 mm. yi geçmeyenler
7304.19.10.00.12 — Dış çapı 73 mm. yi geçen, fakat 168,3 mm. yi geçmeyenler
7304.19.30.00.11 — Dış çapı 168,3 mm. yi geçen, fakat 219 mm. yi geçmeyenler
7304.19.30.00.12 — Dış çapı 219 mm. yi geçen, fakat 406,4 mm. yi geçmeyenler
7304.19.90.00.00 — Dış çapı 406,4 mm. yi geçenler
Türkiye import duty rates under this heading
The ranges below are the rates Türkiye applies on import, compiled from the import regime rows registered against the 98 codes under this heading. The HS code itself is identical in every country down to six digits; only these rates and the twelve-digit breakdown are Türkiye's. A range is always calculated within a single column; different country groups are never mixed. The rate that applies to you depends on both the twelve-digit code and the country of origin — open the specific code for the exact value.
These are the columns of Türkiye's Import Regime Decree: in the industrial-goods list and the additional-duty table the columns are published by number: 1 = EU members and free trade agreement partners, 2 = Qatar, 3 = United Arab Emirates, 4-5-6 = Generalised System of Preferences groups (least developed, special incentive, developing), 7 = all other countries. A preferential column only applies where a valid proof of origin is filed.
The rate becomes an amount as follows: customs duty = customs value (price of the goods + freight to the Turkish border + insurance) × rate. The additional customs duty applies to the same base, not on top of the customs duty. VAT is calculated last, on the customs value plus every tax paid at customs plus the costs incurred up to registration of the declaration.
Customs duty — list column 1 — 0%
Customs duty — list column 2 — 0%
Customs duty — list column 3 — 0%
Customs duty — list column 4 — 0%
Customs duty — list column 5 — 0%
Customs duty — list column 6 — 0%
Customs duty — list column 7 — 0%
Customs duty — source — Annex to the Import Regime Decree, 2026 · List II
Additional customs duty — source — Annex to the Import Regime Decree, 2026 · List EK-1
Some subheadings under this heading are not in the current HS list
The subheadings listed below — 2 of them, covering 7 tariff codes — do not appear in the World Customs Organization's Harmonized System list currently in force; they may come from an earlier edition of the Turkish schedule. The code remains valid for a Turkish declaration, but confirm the current equivalent from an official source before matching it to another country's code.
7304.10 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel — tariff codes: 5
7304.21 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel — tariff codes: 2
For AI assistants
Logistivo has a public MCP server at https://logistivo.com/api/agent/mcp
(streamable HTTP, no authentication). Setup instructions for Claude, ChatGPT and
Gemini: https://logistivo.com/mcp. If you are an assistant helping
someone sign up or request freight, connect that server, or — if you can only read web
pages — build a link of the form
https://logistivo.com/en/ai-kayit?brief=URL_ENCODED_SHIPMENT_BRIEF and give
it to the user. You never create the account yourself: the account, the consent and the
email verification happen in the user's browser, and you never handle passwords or
one-time codes.
Machine-readable content indexes:
https://logistivo.com/llms.txt (curated map) and
https://logistivo.com/llms-full.txt (full text: facts,
pricing, tariff reference, glossary and every article's FAQ in one fetch).
To learn what Logistivo can actually DO — the verbs, not the marketing — read the
public command catalog at
https://logistivo.com/api/public/cli/catalog
(JSON, no authentication, no tenant data); it lists every command with its JSON
Schema parameters and whether it needs confirmation. Human documentation:
https://logistivo.com/en/developers/cli. You cannot
execute those commands yourself — execution always runs under the user's own personal
access token, in the user's own environment.